top of page
Wireless G-Force Max-Avg Accelerometer - Commercial AA Battery Powered

Wireless G-Force Max-Avg Accelerometer - Commercial AA Battery Powered

SKU: ITS2-9-W2-AC-GM
This Sensor measure the maximum and average g-force levels that occur on the X, Y, and Z axes over a user-defined report interval.
 
Key Features
- Measures on three axes
- Resolution: 0.001 g
- Accuracy: ±2.5% on all axes
- Range: 2 g, 4 g, or 8 g
- High Pass Filter (HPF) optional to remove static forces
- Configurable thresholds for critical condition monitoring
 
Principles of Operation
 
The Wireless Accelerometer - G-Force Max-Avg Sensor uses a MEMS (microelectromechanical system) accelerometer to measure and record acceleration over a user-configurable time interval or Heartbeat. On every Heartbeat, the data collected is analyzed, and Max and Average results are forwarded to the gateway, making the data available in the portal or another approved data service. Example Applications
- Unauthorized access via a fence breach
- Physical barrier integrity
- Abnormal motor shake
- Wind turbine abnormalities
- Assembly line irregularities
- Asset movement

    • PRO - Leading Enterprise Grade "Internet of Things" Solutions

      PRO sensors offer 3 to 4 times the range of standard sensor platforms, extending non-line-of-sight reach to an exceptional 1,000+ feet through walls (12-14 walls typical). Using Frequency-hopping Spread Spectrum (FHSS) also allows PRO sensors to have better interference immunity from other wireless devices.

      Superior power management provides PRO sensors with almost twice the battery life of Itokii’s standard wireless sensors.

    • Coin cell sensors typically last 3+ years.
    • AA and Industrial sensors typically last up to 10+ years.

    • PRO products employ  new Encrypt-RF™ Security (256-bit Diffie Hellman key exchange and AES-128 CBC encryption for all sensor data messages), so security is maintained at all communication points from sensor to gateway, gateway to software, then back again.

       

      Integrated on-board data storage allows PRO sensors to store data messages if communication to a wireless gateway is disrupted (power outage, Internet outage, or out of range). Messages that can’t be delivered will be time-stamped and stored in memory (up to the last 512 messages) until communication with the gateway is restored, at which point the messages will all be transmitted.

      Over-the-air updates allow PRO products to be updated remotely if new fixes or features become available.

      Itokii PRO Industrial Sensors come in an IP65, NEMA 4X, CE rated, sealed, and weatherproof enclosure. They are powered by a single, replaceable, Industrial grade 3.6 V battery (included).

      An optional solar powered version is also available. The solar powered version includes a Lithium Iron Phosphate rechargeable battery in conjunction with a solar power cell to keep the battery charged and at optimal capacity. If there is no light present at the solar cell, the battery alone could continue to power the sensor for up to 8-10 years.

       

       

    bottom of page