Itokii´s new Wireless Serial Data Bridge is a bidirectional serial to radio device capable of transmitting serial data over its wireless communication link and delivering wireless data, received in the radio, out of its serial port. The Itokii wireless serial data bridge can be connected to any device equipped with a serial data port to capture the data and transmit it to the Itokii online sensor monitoring and Notification System. The data is stored in the online system and can be reviewed and exported as a data sheet or graph. User customization allows you to set notifications and alerts from the system based on data received from the device. The serial data bridge is also fully configurable via the Itokii online software.
Note: Interface type must be selected at time of purchase. Available for RS232 or RS485 serial interfaces. Requires a Itokii wireless gateway for communication with software.
Interface - RS232 Description:
- Bidirectional serial to radio communication.
- Interfaces with RS232 or RS485.
What's in the box?
- Wireless Serial Data Bridge
- Serial Data Bridge
Serial Data Bridge Specifications
Supply Voltage Requires 5 Volt Power via Serial Port or External Source Current Consumption RS232: 38.9 mA
RS485: 51.2 mA
LED Lights Wireless Activity, Serial RX/TX Activity Operating Temperature -40°C to +85°C (-40°F to +185°F) Interface Support RS232 or RS485 Supported Baudrates 1200, 2400, 4800, 9600, 14400, 19200, 28800, 38400, 57600, 115200, 230400 Packet Side per Radio Transmission 8 to 24 bytes Max Bandwidth 1 Packet/Second (Max Packet Size – 24 bytes) Serial Buffer 1280 bytes (If this buffer overflows the serial receiver will be disabled until the buffer is emptied) Data Bits 8 Parity None, Odd, Even Stop Bits 1 or 2
900 MHz Specifications
Operating Frequency 900 MHz Operating Frequency Certifications Complies with Part 15 of the FCC Rules. (FCC ID: ZTL-RFSC1)
Complies with Industry Canada standards. (IC: 9794A-RFSC1)