The Itokii Voltage Detector - 50 VDC detects the presence or absence of electricity. It is intended for use on battery or other DC sources, up to 50 Volts. Not intended for use with AC Voltages. It is perfect for batteries, adapters, solar equipment, vehicles or machinery, and any other electrical appliance monitoring. The sensor triggers on voltage presence to voltage Absence and vice versa. The data is displayed as "Voltage Detected" or "No Voltage".
- Interfaces with other devices or power lines up to 50 volts DC.
- Max sensor input voltage up to 50 volts DC.
* Actual range may vary depending on environment.
** Battery life is determined by sensor reporting frequency and other variables.
What does this wireless sensor's data look like in software?
What's in the box?
- Wireless Sensor
- CR2032 - Coin Cell Battery
- Mounting Hardware
Voltage Detection Sensor Specifications
Maximum Rated Input Voltage Up to 50 Volts DC Minimum Rated Input Voltage -50.0 Volts Voltage Detection Threshold Present above ~.47 Volt, Absent below ~.47 Volt Trigger Transmits Data on State Change Open Circuit Reading Voltage Absent
Coin Cell Specifications
Battery Type Replaceable 3.0V Coin Cell Battery Dimension 1.775 in x 1.04 in x 0.785 in Max Operating Temperature -20°C to +60°C (-4° to +140°F) Optimal Battery Operating Temperature (Coin Cell) +10°C to +50°C (+50°F to +122°F) Supply Voltage 2.0 - 3.6 V (Single CR2032 Coin Cell Battery) Device Range 250 - 300 ft. non-line-of-sight device range* Battery Life At 1 hour heartbeat setting, coin cell battery will typically last ~ 1-2 Years. ** Enclosure Material ABS
900 MHz Specifications
Operating Frequency 900 MHz Operating Frequency Certifications Complies with Part 15 of the FCC Rules. (FCC ID: ZTL-RFSC1)
Complies with Industry Canada standards. (IC: 9794A-RFSC1)