Itokii Industrial 900 MHz Ethernet Gateway

ITG2-9-EG-EGW

Product Description

The Itokii Industrial Ethernet gateway allows your Itokii Wireless Sensors to communicate with the Itokii Online Wireless Sensor Monitoring and Notification System without the need for a PC. Simply plug this device into any open network port with internet connection and it will automatically connect with our online servers. The device will buffer up to 16,000 sensor data messages in on-board memory in the event of an internet connection interruption. When internet communication is re-established the sensor data will download to the Itokii online system.

The Power-Over-Ethernet option features modified gateway hardware allowing it to be powered through the Ethernet port. Note: This option includes gateway modification only and does not include an Ethernet power injector.



Product Features

  • AC power supply (POE version also available)
  • Existing Internet connection required
  • No PC required for operation
  • Real time TCP interface
  • SNMP poll and trap interface
  • MODBUS TCP interface
  • FCC, IC and CE certified

What's in the box?

    • Ethernet Gateway
    • High Gain Antenna
    • Power Supply
    • Ethernet Cable
    • Ethernet Gateway Quick Start Guide
  • Ethernet Gateway Specifications

    Dimension 139.85 x 101.75 x 34.95 mm
    Storage Temperature: -20 to +85 °C (-4 to 185 °F)
    Enclosure Material ABS plastic
    LED Lights H/W status, Itokii connection status, sensor data activity
    Antenna Type SMA: 5.0 dBi Gain
    Operating Temperature -10 to +70 °C (14 to +158 °F)
    Device Memory 16,000 sensor messages (Sensor messages will be stored in the event of Internet outage and transferred when connection is restored)
    Hardware 10/100 Ethernet Controller
    IEEE Standard Compliance 802.3-2002
    Operation Full- and Half-Duplex
    Cross-Over Correction Automatic MDI/MDI-X
    Addressing Pre-programmed MAC Address
    Host Address t1.sensorsgateway.com
    Default Port 3000
    Protocols Supported UDP, DHCP, TCP, SNMP, MODBUS
    Cable Connector Cat 5
    Current Requirements, Full Operation 225 mA steady
    Interface Support Real-Time TCP Interface
    SNMP Poll and Trap Interface
    MODBUS TCP Interface
    Power Supply 5.5 V AC adapter
    Power-Over-Ethernet option requires 5.5 V Ethernet power injector (not included)
     

    Industrial 900 MHz Specifications

    Operating Frequency 900 MHz Operating Frequency
    Device Range Up to 1,000 ft. non-line-of-sight, wireless device range*
    Security Diffie-Hellman Key Exchange + AES-128 CBC
    Certifications Complies with Part 15 of the FCC Rules. (FCC ID: ZTL-G2SC1)
    Complies with Industry Canada standards. (IC: 9794A-G2SC1)