Itokii INDUSTRIAL WCDMA 4 LAN ROUTER + Wi-Fi

ITO-B-Router-WIFI

Key Features

1. Open WRT for second developmen
2. 
4G/3G/PPPoE/DHCP and Static address connection mode, switchover between wired and wireless connectivity, with rich working modes to choose
3. 
APN/VPDN to ensure the security of data transmission
4. 
Multiple VPN protocols, IPSec, L2TP, PPTP and OPEN VPN
5. 
DHCP server, DHCP binding MAC address, DDNS, Firewall, NAT, DMZ host, QoS, Traffic Analysis, Real-time display of data transfer rate, etc.
5. 
TCP/IP, UDP, FTP, HTTP network protocols
6. 
SPI Firewall, DoS attack, VPN traversal, Access Control, Port Mapping, DMZ Mapping, Access Control List(ACL), IP-MAC binding and Clone function, etc.
7. 
Heartbeat link detection, offline automatic reconnection
8. 
Hardware and software auto inspection technology, enable operation fault auto repairing
9. 
Status query of system, network connection, routing
10. 
Telnet, web, ssh configurations
11. 
Web upgrade, local system log, remote log, serial port output log.System
 
CPU and Memory
CPU Industrial 32-bit
FLASH 16MB(Extendable to 32MB)
SDRAM 128MB(Extendable to 256MB)

Interface
 
Power Requirements
Standard Power DC 12V/1.5A
Power Range DC 5~35V
Built-in power inverting protection and over voltage protection
Serial Port
RS232, or RS485(or RS422)
  • Industrial terminal block, suitable for industrial applications
  • Built-in 15KV ESD protection, and TTL GPIOs is customizable
Serial Port Rate 300~230400bits/s
Data Bit 5, 6, 7, 8 bits
Stop Bit 1, 1.5, 2 bits
Check No check, Even-parity Check, Odd Parity Check, SPACE and MARK check
Ethernet Port
WAN 1x10/100M WAN(RJ45), Auto MDI/MDIX, 1.5KV magnetic isolation protection
LAN 4x10/100M LAN(RJ45), Auto MDI/MDIX, 1.5KV magnetic isolation protection
WIFI
Standard IEEE802.11b/g/n for wireless LAN
Transmission Rates IEEE802.11b/g: Up to 54Mbps
IEEE802.11n: Up to 300Mbps
Security WEP, WPA/WPA2
TX Transmit Power 21.5dBm(11g), 26dBm(11b)
RX Sensitivity <-72dBm@54Mpbs
Others
Indicators LAN, WAN, WIFI, Alarm, Online, System, Signal Strength, Power
Antenna Interface Standard SMA female antenna interface, characteristic impedance 50Ω
SIM/UIM Card Holder Standard drawer type card holder, support 1.8V/3V SIM/UIM card, built-in 15KV ESD protection

Power Requirements
Standard Power DC 12V/1.5A
Power Range DC 5~35V
Built-in power inverting protection and over voltage protection
Serial Port
RS232, or RS485(or RS422)
  • Industrial terminal block, suitable for industrial applications
  • Built-in 15KV ESD protection, and TTL GPIOs is customizable
Serial Port Rate 300~230400bits/s
Data Bit 5, 6, 7, 8 bits
Stop Bit 1, 1.5, 2 bits
Check No check, Even-parity Check, Odd Parity Check, SPACE and MARK check
Ethernet Port
WAN 1x10/100M WAN(RJ45), Auto MDI/MDIX, 1.5KV magnetic isolation protection
LAN 4x10/100M LAN(RJ45), Auto MDI/MDIX, 1.5KV magnetic isolation protection
WIFI
Standard IEEE802.11b/g/n for wireless LAN
Transmission Rates IEEE802.11b/g: Up to 54Mbps
IEEE802.11n: Up to 300Mbps
Security WEP, WPA/WPA2
TX Transmit Power 21.5dBm(11g), 26dBm(11b)
RX Sensitivity <-72dBm@54Mpbs
Others
Indicators LAN, WAN, WIFI, Alarm, Online, System, Signal Strength, Power
Antenna Interface Standard SMA female antenna interface, characteristic impedance 50Ω
SIM/UIM Card Holder Standard drawer type card holder, support 1.8V/3V SIM/UIM card, built-in 15KV ESD protection
 
Product Characteristics

Environmental Limits
Operating Temperature: -35~+75ºC(-31~+167 ºF) Storage Temperature: -40~+80ºC(-40~+176 ºF)
Ambient Relative Humidity: 93%±3%, non-condensing
Power Consumption
Standby 115~210mA@12VDC
Communication 121~280mA@12VDC
Scheduled Shutdown 2mA@12VDC
Anti-interference
Type Level Voltage/Current Waveform Value
Power Frequency Magnetic Field 3 Continuous sine wave 30A/m
Damped Oscillatory Magnetic Field 3 Continuous sine wave 30A/m
Pulse Magnetic Field 3 Pulse 100A/m
Radiated Electromagnetic Field 3 80MHz~1000MHz Continuous-wave 10V/m
Level 3, suitable for equipment installed in typical industrial environment: Plant, Power Plant, or residence area.
Protection Class
IP30, Housing and system are isolated safely, ideal for industrial automation application
Reliability
MTBF(mean time between failures): >10,000hrs
Ultra-low consumption design, includes sleep mode, scheduled online and offline mode
EMC up to level 3
Use NTP technology, build-in RTC
SIM/UIM card port built-in 15KV ESD protection
Physical Characteristics
Housing Metal, IP30
Dimensions 168x104x27mm(6.61x4.09x1.06 inches), Antenna and other accessories not included