Itokii PRO 900Mhz INDUSTRIAL WIRELESS ACCELEROMETER - VIBRATION METER

ITS2-9-IN-AC-VM

Product Description

PRO Vibration Meters use an accelerometer to measure g-force on 3 axis and then determine speed and frequency. They can be set to only capture when a vibration occurs and sleep when no vibrations are present, or they can be set to measure at a given assessment interval regardless of whether a vibration has occurred. If set to always measure, the sensitivity can be further adjusted to filter out noise. The Vibration Meter will also report the duty cycle, or how long the sensor was measuring vibrations throughout the heartbeat.

PRO - Leading Enterprise Grade "Internet of Things" Solutions

PRO sensors offer 3 to 4 times the range of standard sensor platforms, extending non-line-of-sight reach to an exceptional 1,000+ feet through walls (12-14 walls typical). Using Frequency-hopping Spread Spectrum (FHSS) also allows PRO sensors to have better interference immunity from other wireless devices.

Superior power management provides PRO sensors with almost twice the battery life of Itokii’s standard wireless sensors.

  • Coin cell sensors typically last 3+ years.
  • AA and Industrial sensors typically last up to 10+ years.
PRO products employ new Encrypt-RF™ Security (256-bit Diffie Hellman key exchange and AES-128 CBC encryption for all sensor data messages), so security is maintained at all communication points from sensor to gateway, gateway to software, then back again.

 

Integrated on-board data storage allows PRO sensors to store data messages if communication to a wireless gateway is disrupted (power outage, Internet outage, or out of range). Messages that can’t be delivered will be time-stamped and stored in memory (up to the last 512 messages) until communication with the gateway is restored, at which point the messages will all be transmitted.

Over-the-air updates allow PRO products to be updated remotely if new fixes or features become available.

Itokii PRO Industrial Sensors come in an IP65, NEMA 4X, CE rated, sealed, and weatherproof enclosure. They are powered by a single, replaceable, Industrial grade 3.6 V battery (included).

An optional solar powered version is also available. The solar powered version includes a Lithium Iron Phosphate rechargeable battery in conjunction with a solar power cell to keep the battery charged and at optimal capacity. If there is no light present at the solar cell, the battery alone could continue to power the sensor for up to 8-10 years.



Product Features

  • Reports data as speed (mm/s) and frequency (Hz) on all three axes, and how long the sensor was measuring during the interval.
  • Adjustable measurement methods: Peak acceleration RMS, peak velocity RMS, and true RMS.
  • Itokii online wireless sensor monitoring and notification system to configure sensors, view data and set alerts via SMS text and email.

 

  * Actual range may vary depending on environment.
** Battery life is determined by sensor reporting frequency and other variables.

 


What does this wireless sensor's data look like in software?

Accelerometer - Vibration Meter - Data View in Software

What's in the box?

    • Wireless Sensor
    • Mounting Hardware
    • 3V Industrial Battery (Pre-Installed)
    • SMA Antenna
  • Accelerometer Specifications

    Current Consumption 6 µA (accelerometer listening for vibrations) 
    0.7 µA (sleep mode) 
    2mA (radio idle/off mode) 
    2mA (measurement mode) 
    25mA (radio RX mode) 
    35mA (radio TX mode)
    Speed Measurement Range 0 to 25.5 mm/s
    Speed Measurement Resolution 0.1 mm/s
    Frequency Measurement Range 0 to 200 Hz
    Frequency Measurement Resolution 3.125 Hz rounded down to nearest 1 Hz
     

    PRO Industrial Specifications

    Supply Voltage 2.0 - 3.8 VDC
    Battery Type Replaceable 3.6V, 1800mAH (single AA sized)
    Battery Life Up to 10 Year Battery Life.**
    Max Operating Temperature -40° to 85°C (-40° to 185°F)
    Optimal Battery Operating Temperature +10°C to +50°C (+50°F to +122°F)
    Solar Power Option 3.0 VDC Solar Panel 
    600 mAH Rechargeable Battery (>2000 Charge Cycles - 80% of Initial Capacity)
    Charging Temperature Range: 0° to 45°C (32° to 113°F)
    Max Temperature Range: -20° to 60°C (-4° to 140°F)
    Enclosure Material IP65, NEMA 4X, CE rated, sealed, weatherproof enclosure
    UL Rating UL Listed to UL508-4x specifications (File E194432)
    Dimension 3.7 in x 2.32 in x 1.38 in
     

    PRO 900 MHz Specifications

    Operating Frequency 900 MHz Operating Frequency
    Device Range Up to 1,000 ft. non-line-of-sight, wireless device range*
    Security Diffie-Hellman Key Exchange + AES-128 CBC
    Certifications Complies with Part 15 of the FCC Rules. (FCC ID: ZTL-G2SC1)
    Complies with Industry Canada standards. (IC: 9794A-G2SC1)
    Specifications Image