Itokii PRO INDUSTRIAL WIRELESS AC CURRENT METER - 150 AMP

ITS2-9-IN-CM-150

Product Description

Itokii PRO industrial wireless AC Current Meters measure the RMS current of an alternating current (AC) system using a current transformer (CT) that wraps around the "hot" wire of a two wire (hot, common, ground(optional)) power system. The sensor reports Minimum RMS current, maximum RMS current, average RMS current, and amp hours to the Itokii system. The Itokii system is capable of generating watt hour or kilowatt hour readings as well.

PRO - Leading Enterprise Grade "Internet of Things" Solutions

PRO sensors offer 3 to 4 times the range of standard sensor platforms, extending non-line-of-sight reach to an exceptional 1,000+ feet through walls (12-14 walls typical). Using Frequency-hopping Spread Spectrum (FHSS) also allows PRO sensors to have better interference immunity from other wireless devices.

Superior power management provides PRO sensors with almost twice the battery life of Itokii’s standard wireless sensors.

  • Coin cell sensors typically last 3+ years.
  • AA and Industrial sensors typically last up to 10+ years.
PRO products employ  new Encrypt-RF™ Security (256-bit Diffie Hellman key exchange and AES-128 CBC encryption for all sensor data messages), so security is maintained at all communication points from sensor to gateway, gateway to software, then back again.

 

Integrated on-board data storage allows PRO sensors to store data messages if communication to a wireless gateway is disrupted (power outage, Internet outage, or out of range). Messages that can’t be delivered will be time-stamped and stored in memory (up to the last 512 messages) until communication with the gateway is restored, at which point the messages will all be transmitted.

Over-the-air updates allow PRO products to be updated remotely if new fixes or features become available.

Itokii PRO Industrial Sensors come in an IP65, NEMA 4X, CE rated, sealed, and weatherproof enclosure. They are powered by a single, replaceable, Industrial grade 3.6 V battery (included).

An optional solar powered version is also available. The solar powered version includes a Lithium Iron Phosphate rechargeable battery in conjunction with a solar power cell to keep the battery charged and at optimal capacity. If there is no light present at the solar cell, the battery alone could continue to power the sensor for up to 8-10 years.


Notes: 

WARNING: This AC current meter is for monitoring AC voltage only. Do Not Use with DC voltage.


Product Features

  • Measures amp hours, max RMS current, min RMS current, and average RMS current.
  • Capable of generating Watt Hour or Kilowatt Hour readings using Itokii.
  • Data logging for accumulated amp hour readings.
  • Can notify based on current levels or changes in current levels.
  • Measures current from 0 to 150 Amps.

 

  * Actual range may vary depending on environment.
** Battery life is determined by sensor reporting frequency and other variables.

 


What does this wireless sensor's data look like in software?

Wireless AC Current Meters - 150 Amp - Data View in Software

What's in the box?

    • Wireless Sensor
    • Mounting Hardware
    • 3V Industrial Battery (Pre-Installed)
    • SMA Antenna
  • AC Current Meter Specifications

    Accuracy +/- 2% @ 2 to 150 Arms, +/- .4 Arms @ < 15 Arms
    Current Transducer Frequency Range 50 – 100 Hz
    Absolute Max CT Current 200 Amps RMS (Arms)
    Maximum Accurate CT Current 150 Arms
    Calibrated Accuracy with Appropriate Offset +/- 1% @ 2 to 150 Arms, +/- .2 Arms @ < 2 Arms
    Offset Limits -1.27 to + 1.27 Arms (default set to +.3 Arms)
    Measurement Resolution ~.1 Arms
     

    PRO Industrial Specifications

    Supply Voltage 2.0 - 3.8 VDC
    Battery Type Replaceable 3.6V, 1800mAH (single AA sized)
    Battery Life Up to 10 Year Battery Life.**
    Max Operating Temperature -40° to 85°C (-40° to 185°F)
    Optimal Battery Operating Temperature +10°C to +50°C (+50°F to +122°F)
    Solar Power Option 3.0 VDC Solar Panel 
    600 mAH Rechargeable Battery (>2000 Charge Cycles - 80% of Initial Capacity)
    Charging Temperature Range: 0° to 45°C (32° to 113°F)
    Max Temperature Range: -20° to 60°C (-4° to 140°F)
    Enclosure Material IP65, NEMA 4X, CE rated, sealed, weatherproof enclosure
    UL Rating UL Listed to UL508-4x specifications (File E194432)
    Dimension 3.7 in x 2.32 in x 1.38 in
     

    PRO 900 MHz Specifications

    Operating Frequency 900 MHz Operating Frequency
    Device Range Up to 1,000 ft. non-line-of-sight, wireless device range*
    Security Diffie-Hellman Key Exchange + AES-128 CBC
    Certifications Complies with Part 15 of the FCC Rules. (FCC ID: ZTL-G2SC1)
    Complies with Industry Canada standards. (IC: 9794A-G2SC1)
    Specifications Image