Itokii PRO INDUSTRIAL WIRELESS DRY CONTACT SENSOR

ITS2-9-IN-DC-CF-L01

Product Description

Itokii wireless dry contact sensors can be used to detect contact between two wired contact points. This sensor can be used with an external mechanical switch or a contact plate to alert the user via SMS text and/or email when the contacts touch or a switch is triggered.

PRO - Leading Enterprise Grade "Internet of Things" Solutions

PRO sensors offer 3 to 4 times the range of standard sensor platforms, extending non-line-of-sight reach to an exceptional 1,000+ feet through walls (12-14 walls typical). Using Frequency-hopping Spread Spectrum (FHSS) also allows PRO sensors to have better interference immunity from other wireless devices.

Superior power management provides PRO sensors with almost twice the battery life of Itokii’s standard wireless sensors.

  • Coin cell sensors typically last 3+ years.
  • AA and Industrial sensors typically last up to 10+ years.
PRO products employ Itokii's new Encrypt-RF™ Security (256-bit Diffie Hellman key exchange and AES-128 CBC encryption for all sensor data messages), so security is maintained at all communication points from sensor to gateway, gateway to software, then back again.

 

Integrated on-board data storage allows PRO sensors to store data messages if communication to a wireless gateway is disrupted (power outage, Internet outage, or out of range). Messages that can’t be delivered will be time-stamped and stored in memory (up to the last 512 messages) until communication with the gateway is restored, at which point the messages will all be transmitted.

Over-the-air updates allow PRO products to be updated remotely if new fixes or features become available.

Itokii PRO Industrial Sensors come in an IP65, NEMA 4X, CE rated, sealed, and weatherproof enclosure. They are powered by a single, replaceable, Industrial grade 3.6 V battery (included).

An optional solar powered version is also available. The solar powered version includes a Lithium Iron Phosphate rechargeable battery in conjunction with a solar power cell to keep the battery charged and at optimal capacity. If there is no light present at the solar cell, the battery alone could continue to power the sensor for up to 8-10 years.



Product Features

  • Senses immediate contact between wires.
  • Can also sense when contact is broken.
  • Variety of lead lengths available.

What does this wireless sensor's data look like in software?

Dry contact sensor data view in software

What's in the box?

    • Wireless Sensor
    • Mounting Hardware
    • 3V Industrial Battery (Pre-Installed)
    • SMA Antenna
  • PRO Industrial Specifications

    Supply Voltage 2.0 - 3.8 VDC
    Battery Type Replaceable 3.6V, 1800mAH (single AA sized)
    Battery Life Up to 10 Year Battery Life.**
    Max Operating Temperature -40° to 85°C (-40° to 185°F)
    Optimal Battery Operating Temperature +10°C to +50°C (+50°F to +122°F)
    Solar Power Option 3.0 VDC Solar Panel 
    600 mAH Rechargeable Battery (>2000 Charge Cycles - 80% of Initial Capacity)
    Charging Temperature Range: 0° to 45°C (32° to 113°F)
    Max Temperature Range: -20° to 60°C (-4° to 140°F)
    Enclosure Material IP65, NEMA 4X, CE rated, sealed, weatherproof enclosure
    UL Rating UL Listed to UL508-4x specifications (File E194432)
    Dimension 3.7 in x 2.32 in x 1.38 in
     

    PRO 900 MHz Specifications

    Operating Frequency 900 MHz Operating Frequency
    Device Range Up to 1,000 ft. non-line-of-sight, wireless device range*
    Security Diffie-Hellman Key Exchange + AES-128 CBC
    Certifications Complies with Part 15 of the FCC Rules. (FCC ID: ZTL-G2SC1)
    Complies with Industry Canada standards. (IC: 9794A-G2SC1)

     

      * Actual range may vary depending on environment.
    ** Battery life is determined by sensor reporting frequency and other variables.

     


    Specifications Image