Itokii PRO WIRELESS 0-20 MA CURRENT METER - AA BATTERY POWERED

ITS2-9-W2-MA-020

Product Description

Itokii wireless 0-20mA current meters are capable of measuring the current off another device or sensor, up to 20mA (DC), by connecting the leads of the sensor to the positive and ground terminals of the device being measured. Examples of interfacing devices include, but are not limited to: Current transducers (CTs) with outputs up to 20 mA, pH sensor, dissolved oxygen sensor, pressure sensor, magnetic flow meters, velocity or acceleration sensors, industrial vibration sensors, industrial accelerometers, any kind of sensor that specifies the output is in (mA) within the range of 0 – 20.

PRO - Leading Enterprise Grade "Internet of Things" Solutions

PRO sensors offer 3 to 4 times the range of standard sensor platforms, extending non-line-of-sight reach to an exceptional 1,000+ feet through walls (12-14 walls typical). Using Frequency-hopping Spread Spectrum (FHSS) also allows PRO sensors to have better interference immunity from other wireless devices.

Superior power management provides PRO sensors with almost twice the battery life of Itokii’s standard wireless sensors.

  • Coin cell sensors typically last 3+ years.
  • AA and Industrial sensors typically last up to 10+ years.
PRO products employ Itokii's new Encrypt-RF™ Security (256-bit Diffie Hellman key exchange and AES-128 CBC encryption for all sensor data messages), so security is maintained at all communication points from sensor to gateway, gateway to software, then back again.

 

Integrated on-board data storage allows PRO sensors to store data messages if communication to a wireless gateway is disrupted (power outage, Internet outage, or out of range). Messages that can’t be delivered will be time-stamped and stored in memory (up to the last 512 messages) until communication with the gateway is restored, at which point the messages will all be transmitted.

Over-the-air updates allow PRO products to be updated remotely if new fixes or features become available.

The standard version of this sensor is powered by two replaceable 1.5 V AA sized batteries (included with purchase). This sensor is also available with a line power option. The line powered version of this sensor has a barrel power connector allowing it to be powered by a standard 3.0 - 3.8 V power supply (Included with Line Power option upgrade). The line powered version also uses two standard 1.5 V AA batteries as backup for uninterrupted operation in the event of line power outage.

Power options must be selected at time of purchase, as the internal hardware of the sensor must be changed to support the selected power requirements.


Notes:  WARNING: Use caution when interfacing to the Itokii 0-20mA Current meter. Negative voltages, any kind of AC Voltages, or DC Voltage exceeding 3.6V WILL DAMAGE the electronics of the wireless sensor. Itokii is not responsible for troubleshooting, replacing or reimbursing damages incurred by disregarding this warning.

Product Features

  • Interfaces with sensors between 0-20 mA.

What does this wireless sensor's data look like in software?

Wireless 0-20 mA Current Meter - Data View in Software

What's in the box?

    • Wireless Sensor
    • Mounting Hardware
    • 2 x AA Batteries
  • 0-20 mA Current Meter Specifications

    Maximum Rated Input Voltage Up to 20 mA
     

    PRO AA Specifications

    Battery Type 2 Replaceable AA 1.5 V Batteries
    Dimension 4.375 in x 2.470 in x 1.12 in
    Supply Voltage 2.0 - 3.8 V (2 x AA 1.5V Batteries or Optional Power Supply)
    Battery Life At 1 hour heartbeat setting, included AA batteries will typically last 6-8 Years. **
    Max Operating Temperature Using AA Alkaline -18°C to 55°C (0°F to 130°F)
    Max Operating Temperature Using AA Lithium -40°C to 60°C (-40°F to 140°F)
    Optimal Battery Operating Temperature +10°C to +50°C (+50°F to +122°F)
    Enclosure Material ABS
     

    PRO 900 MHz Specifications

    Operating Frequency 900 MHz Operating Frequency
    Device Range Up to 1,000 ft. non-line-of-sight, wireless device range*
    Security Diffie-Hellman Key Exchange + AES-128 CBC
    Certifications Complies with Part 15 of the FCC Rules. (FCC ID: ZTL-G2SC1)
    Complies with Industry Canada standards. (IC: 9794A-G2SC1)

     

      * Actual range may vary depending on environment.
    ** Battery life is determined by sensor reporting frequency and other variables.

     


    Specifications Image