Itokii PRO WIRELESS OPEN-CLOSED SENSORS - COIN CELL POWERED

ITS2-9-W1-OC-ST

Product Description

Itokii wireless open/closed sensors provide information on the status of doors, windows, cabinets, etc. Know if a building or area is being accessed when it should not be, or if a door or window has been left open. Alerts can be setup to notify a user by SMS text, email or voice call if a door or window has been opened or left open.

PRO - Leading Enterprise Grade "Internet of Things" Solutions

PRO sensors offer 3 to 4 times the range of standard sensor platforms, extending non-line-of-sight reach to an exceptional 1,000+ feet through walls (12-14 walls typical). Using Frequency-hopping Spread Spectrum (FHSS) also allows PRO sensors to have better interference immunity from other wireless devices.

Superior power management provides PRO sensors with almost twice the battery life of Itokii’s standard wireless sensors.

  • Coin cell sensors typically last 3+ years.
  • AA and Industrial sensors typically last up to 10+ years.
PRO products employ Itokii's new Encrypt-RF™ Security (256-bit Diffie Hellman key exchange and AES-128 CBC encryption for all sensor data messages), so security is maintained at all communication points from sensor to gateway, gateway to software, then back again.

 

Integrated on-board data storage allows PRO sensors to store data messages if communication to a wireless gateway is disrupted (power outage, Internet outage, or out of range). Messages that can’t be delivered will be time-stamped and stored in memory (up to the last 512 messages) until communication with the gateway is restored, at which point the messages will all be transmitted.

Over-the-air updates allow PRO products to be updated remotely if new fixes or features become available.



Product Features

  • Sense immediate door or window access.
  • Sense if a door, window, drawer is opened or has been left open
  • Monitor access to specific areas of buildings.

What does this wireless sensor's data look like in software?

Monnit Wireless Open / Closed Sensor - Data View in Software

What's in the box?

    • Sensor Magnet with Mounting Flange
    • Wireless Sensor
    • CR2032 - Coin Cell Battery
    • Mounting Hardware
  • Magnetic Sensor Specifications

    Switch Cycles 50 million
    Operation Gap Up to 3/4 inch
    Magnet Alnico
    Magnet Case Construction Weatherproof, high-impact ABS plastic with self-adhesive backing
    Magnet Temperature Range -15°F to 160°F (-25°C to 70°C)
    Wire Leads 22 gauge / 13.5 in length (+/- 1.5 in)
     

    PRO Coin Cell Specifications

    Battery Type Replaceable 3.0V (CR2032) Coin Cell Battery
    Dimension 2.0 in x 1.125 in x 0.875 in
    Max Operating Temperature -7°C to +60°C ( 20°F to +140°F )
    Optimal Battery Operating Temperature (Coin Cell) +10°C to +50°C ( +50°F to +122°F )
    Supply Voltage 2.0 - 3.8 VDC
    Battery Life At 1 hour heartbeat setting, coin cell battery will last up to 4 years. **
    Enclosure Material ABS
     

    PRO 900 MHz Specifications

    Operating Frequency 900 MHz Operating Frequency
    Device Range Up to 1,000 ft. non-line-of-sight, wireless device range*
    Security Diffie-Hellman Key Exchange + AES-128 CBC
    Certifications Complies with Part 15 of the FCC Rules. (FCC ID: ZTL-G2SC1)
    Complies with Industry Canada standards. (IC: 9794A-G2SC1)

     

      * Actual range may vary depending on environment.
    ** Battery life is determined by sensor reporting frequency and other variables.

     


    Specifications Image