Itokii PRO wireless pulse counters can be integrated with up to four, dry contact or mechanical switch and closure devices to count the number of actuations occurring within a given time frame for each input.
PRO - Leading Enterprise Grade "Internet of Things" Solutions
PRO sensors offer 3 to 4 times the range of standard sensor platforms, extending non-line-of-sight reach to an exceptional 1,000+ feet through walls (12-14 walls typical). Using Frequency-hopping Spread Spectrum (FHSS) also allows PRO sensors to have better interference immunity from other wireless devices.
Superior power management provides PRO sensors with almost twice the battery life of Itokii’s standard wireless sensors.
- Coin cell sensors typically last 3+ years.
- AA and Industrial sensors typically last up to 10+ years.
Integrated on-board data storage allows PRO sensors to store data messages if communication to a wireless gateway is disrupted (power outage, Internet outage, or out of range). Messages that can’t be delivered will be time-stamped and stored in memory (up to the last 512 messages) until communication with the gateway is restored, at which point the messages will all be transmitted.
Over-the-air updates allow PRO products to be updated remotely if new fixes or features become available.
The standard version of this sensor is powered by two replaceable 1.5 V AA sized batteries (included with purchase). This sensor is also available with a line power option. The line powered version of this sensor has a barrel power connector allowing it to be powered by a standard 3.0 - 3.8 V power supply (Included with Line Power option upgrade). The line powered version also uses two standard 1.5 V AA batteries as backup for uninterrupted operation in the event of line power outage.
Power options must be selected at time of purchase, as the internal hardware of the sensor must be changed to support the selected power requirements.
- Counts the number of pulses in given time frame. (User can set to aggregate pulses, or set to report each pulse as an individual event.)
- Support for up to four separate inputs.
What does this wireless sensor's data look like in software?
What's in the box?
- Wireless Sensor
- Mounting Hardware
- 2 x AA Batteries
Pulse Counter Specifications
Number of Inputs / Counters 1 input or 4 input (based on selection) Counter Bit Depth 16 bit Detection Wires High Impedance 2-Wire (single input) or 5-Wire (multi-input) Counter Operation Positive and / or Negative Edge Pulses Compatibility Open Collector NPN Switches
Transactions per Counter Input 65,000 Max / Heartbeat (Transmission)
PRO AA Specifications
Battery Type 2 Replaceable AA 1.5 V Batteries Dimension 4.375 in x 2.470 in x 1.12 in Supply Voltage 2.0 - 3.8 V (2 x AA 1.5V Batteries or Optional Power Supply) Battery Life At 1 hour heartbeat setting, included AA batteries will typically last 6-8 Years. ** Max Operating Temperature Using AA Alkaline -18°C to 55°C (0°F to 130°F) Max Operating Temperature Using AA Lithium -40°C to 60°C (-40°F to 140°F) Optimal Battery Operating Temperature +10°C to +50°C (+50°F to +122°F) Enclosure Material ABS
PRO 900 MHz Specifications
Operating Frequency 900 MHz Operating Frequency Device Range Up to 1,000 ft. non-line-of-sight, wireless device range* Security Diffie-Hellman Key Exchange + AES-128 CBC Certifications Complies with Part 15 of the FCC Rules. (FCC ID: ZTL-G2SC1)
Complies with Industry Canada standards. (IC: 9794A-G2SC1)
* Actual range may vary depending on environment.
** Battery life is determined by sensor reporting frequency and other variables.