Itokii wireless accelerometers can be used in a host of applications where knowing impact, vibration, inclination, etc. is required.
The wireless accelerometer - G-Force snapshot sensor activates at a set time interval (defined by user) and measures g-force along X, Y and Z axes. Primary use is as an inclinometer or tilt sensor. There are three operating modes, ±2 G, ±4 G, or ±8G. The data displayed is the g-force on each axis, e.g. –> X: 0.001 Y: 0.031 Z: 1.01.
- Takes 3-Axis G-Force Measurements
- 4096 count/g Sensitivity
* Actual range may vary depending on environment.
** Battery life is determined by sensor reporting frequency and other variables.
What does this wireless sensor's data look like in software?
What's in the box?
- Wireless Sensor
- CR2032 - Coin Cell Battery
- Mounting Hardware
Measurement Accuracy ± 2.5 %
Minimum G Force to Turn On/Wake Up
0.050 g - 0.100 g Fastest Update Interval/Heart Rate in Any Configuration 1 Minute Sampling Rate: 500 Samples/Sec. Current Consumption 0.7 µA (sleep mode)
2mA (radio idle/off mode)
2mA (measurement mode)
25mA (radio RX mode)
35mA (radio TX mode)
Sensitivity 4096 count/g Sensitivity Range ± 2.0 g
Coin Cell Specifications
Battery Type Replaceable 3.0V Coin Cell Battery Dimension 1.775 in x 1.04 in x 0.785 in Max Operating Temperature -20°C to +60°C (-4° to +140°F) Optimal Battery Operating Temperature (Coin Cell) +10°C to +50°C (+50°F to +122°F) Supply Voltage 2.0 - 3.6 V (Single CR2032 Coin Cell Battery) Device Range 250 - 300 ft. non-line-of-sight device range* Battery Life At 1 hour heartbeat setting, coin cell battery will typically last ~ 1-2 Years. ** Enclosure Technology PinchPower™ Wireless Sensor Enclosures Enclosure Material ABS
900 MHz Specifications
Operating Frequency 900 MHz Operating Frequency Certifications Complies with Part 15 of the FCC Rules. (FCC ID: ZTL-RFSC1)
Complies with Industry Canada standards. (IC: 9794A-RFSC1)