Itokii WIRELESS ACCELEROMETER - IMPACT DETECT - COMMERCIAL COIN CELL POWERED

ITS-9-W1-AC-IM

Product Description

Itokii wireless accelerometers can be used in a host of applications where knowing impact, vibration, inclination, etc. is required.

The wireless accelerometer - Impact Detection sensor activates when g-forces are exceeded by a user defined threshold – up to 8 g-force. The user can key in the desired threshold for the g-force trigger. This sensor has two operation modes that can be also selected by the user: High Performance and Low Power. High Performance has an output data rate of 800 Hz with the High Pass Filter cutoff at 16 Hz while the Low Power has an output data rate of 12.5 Hz with the High Pass Filter cutoff at 0.25 Hz.


Notes:  These accelerometers do not "stream" continuous data. Please reference the data sheet for further information.

Product Features

  • Detects Impact (G-Force Threshold)

What does this wireless sensor's data look like in software?

Accelerometer - Impact Detect - Data View in Software

What's in the box?

    • Wireless Sensor
    • CR2032 - Coin Cell Battery
    • Mounting Hardware
  • Accelerometer Specifications

    Sensitivity Range ± 2.0 g
    Measurement Accuracy ± 2.5 %
    Minimum G Force to Turn On/Wake Up 0.050 g - 0.100 g
    Fastest Update Interval/Heart Rate in Any Configuration 1 Minute Sampling Rate: 500 Samples/Sec.
    Current Consumption 0.7 µA (sleep mode) 
    2mA (radio idle/off mode) 
    2mA (measurement mode) 
    25mA (radio RX mode) 
    35mA (radio TX mode)
    Sensitivity 096 count/g
    Data Rate 12.5 Hz Low Power, 800 Hz High Performance
    High Pass Filter 0.25 Hz Low Power, 16 Hz High Performance
    Measurement Current 6 uA Low Power, 165 uA High Performance
     

    Coin Cell Specifications

    Battery Type Replaceable 3.0V Coin Cell Battery
    Dimension 1.775 in x 1.04 in x 0.785 in
    Max Operating Temperature -20°C to +60°C (-4° to +140°F)
    Optimal Battery Operating Temperature (Coin Cell) +10°C to +50°C (+50°F to +122°F)
    Supply Voltage 2.0 - 3.6 V (Single CR2032 Coin Cell Battery)
    Device Range 250 - 300 ft. non-line-of-sight device range*
    Battery Life At 1 hour heartbeat setting, coin cell battery will typically last ~ 1-2 Years. **
    Enclosure Material ABS
     

    900 MHz Specifications

    Operating Frequency 900 MHz Operating Frequency
    Certifications Complies with Part 15 of the FCC Rules. (FCC ID: ZTL-RFSC1)
    Complies with Industry Canada standards. (IC: 9794A-RFSC1)

     

      * Actual range may vary depending on environment.
    ** Battery life is determined by sensor reporting frequency and other variables.

     


    Specifications Image